Click image to view full size image
Shaanxi Toptech Titanium Industry Co.,Ltd is one of the best China titanium machined parts manufacturers and suppliers, welcome to wholesale quality titanium components products from our factory and company.
Titanium material offers many advantages for designer and engineer, including excellent corrosion resistance, high strength-weight ratio and good form-ability. Many titanium alloys are in use, although the Commercially Pure (CP) grade 1 to 4 and Ti-6Al-4V (Grade 5) are the most common material. For the titanium forgings, there are three main shapes including Disc, Ring and Block. We also could make the machined parts according to customer’s drawing. They is used widely in chemical,metallurgy,salt-making,aerospace,military,medical and marine engineering ,and so on.
Item Name |
Titanium Machined Parts |
Material |
Gr1, Gr2, Gr3, Gr4 ( CP Ti ), Gr5, Gr7, Gr9, Gr12,etc. |
Size |
As per customer’s drawing |
Standards |
ASTM B381,ASTM B348, AMS 4928,AMS4965, etc. |
State |
Annealed |
Processing |
Hot forging, Linear cutting, Water jet cutting |
Surface |
Bright, Polished,Machined |
Test |
Chemical ,Mechanical Properties test, Visual, Ultrasonic, Macrostructure, Microstructure |
Application |
Industrial, Chemical, Medical,Aerospace, Marine Engineering, etc. |
Table 1: Chemical composition of ASTM B381-10
Grade |
Fe |
O |
N |
C |
H |
Pd |
Al/Mo |
V/Sn/Ni |
Ti |
Gr.1 |
0.20 |
0.18 |
0.03 |
0.08 |
0.015 |
- |
- |
- |
Bal. |
Gr.2 |
0.30 |
0.25 |
0.03 |
0.08 |
0.015 |
- |
- |
- |
Bal. |
Gr.3 |
0.30 |
0.35 |
0.05 |
0.08 |
0.015 |
- |
- |
- |
Bal. |
Gr. 4 |
0.50 |
0.40 |
0.05 |
0.08 |
0.015 |
- |
- |
- |
Bal. |
E-mail: 